Please login or register.

Login with username, password and session length

News:

Registration is only required if you want to post, and is not needed to read any posts. To avoid excess 'spam' accounts, all accounts where no posts have been made will be deleted after two weeks. Please register again if you wish to post.

Author Topic: Buoys  (Read 2991 times)

December 31, 2023, 10:46:32 AM
  • Member
  • **
  • Posts: 2
    • View Profile
Hi everybody,

I create a new world name (Baie du pouliguen) a french zone on the west oh france (Saint-Nazaire) and i have a texture.bmp et height map for the senerios and it's well done.
When i test it : it's ok. I've seen my land in the senerios editor. I can put my ship et several ship i want.

I have a probleme the buoys : i create a file buoy.ini

This is my terrain.ini :

Number=2

MapImage="textureTZ0W.bmp"

HeightMap(1)="SNTZ0W.png"
Texture(1)="textureTZ0W.bmp"
TerrainLong(1)=-2.45
TerrainLat(1)=47.1833333
TerrainLongExtent(1)=0.183333333
TerrainLatExtent(1)=0.1
TerrainMaxHeight(1)=3
SeaMaxDepth(1)=20

HeightMap(2)="SNTZ0E.png"
Texture(2)="textureTZ0E.bmp"
TerrainLong(2)=-2.316666
TerrainLat(2)=47.2
TerrainLongExtent(2)=0.183333333
TerrainLatExtent(2)=0.1
TerrainMaxHeight(2)=3
SeaMaxDepth(2)=20


And my buoy.ini

Number=65

Type(1)="port"
Long(1)=-2,37586666666667
Lat(1)=47,239025

Type(2)="stbd"
Long(2)=-2,37373333333333
Lat(2)=47,2373361111111

Type(3)="port"
Long(3)=-2,40584444444444
Lat(3)=47,2542

Type(4)="stbd"
Long(4)=-2,40475
Lat(4)=47,2506583333333

Type(5)="stbd"
Long(5)=-2,39181111111111
Lat(5)=47,2541555555556

Type(6)="port"
Long(6)=-2,40575555555556
Lat(6)=47,2590027777778

Type(7)="special_1"
Long(7)=-2,41524166666667
Lat(7)=47,2554666666667

Type(8)="north"
Long(8)=-2,41723888888889
Lat(8)=47,2490583333333

Type(9)="special_1"
Long(9)=-2,41723888888889
Lat(9)=47,2490583333333

Type(10)="north"
Long(10)=-2,34373888888889
Lat(10)=47,226725

Type(11)="stbd"
Long(11)=-2,40713333333333
Lat(11)=47,2638888888889

Type(12)="port"
Long(12)=-2,414375
Lat(12)=47,262525

Type(13)="special_post"
Long(13)=-2,414375
Lat(13)=47,262525

Type(14)="stbd"
Long(14)=-2,410125
Lat(14)=47,2666333333333

Type(15)="special_post"
Long(15)=-2,41034166666667
Lat(15)=47,2692611111111

Type(16)="port"
Long(16)=-2,41735833333333
Lat(16)=47,267425

Type(17)="stbd"
Long(17)=-2,41707777777778
Lat(17)=47,2701638888889

Type(18)="stbd"
Long(18)=-2,41787222222222
Lat(18)=47,2715111111111

Type(19)="port"
Long(19)=-2,42072777777778
Lat(19)=47,2719472222222

Type(20)="stbd"
Long(20)=-2,41943888888889
Lat(20)=47,2727111111111

Type(21)="stbd"
Long(21)=-2,42071666666667
Lat(21)=47,2730972222222

Type(22)="stbd"
Long(22)=-2,422175
Lat(22)=47,2735416666667

Type(23)="port"
Long(23)=-2,422175
Lat(23)=47,2735416666667

Type(24)="port"
Long(24)=-2,42313055555556
Lat(24)=47,2733305555556

Type(25)="port"
Long(25)=-2,35163611111111
Lat(25)=47,2583305555556

Type(26)="stbd"
Long(26)=-2,35210833333333
Lat(26)=47,2584833333333

Type(27)="stbd"
Long(27)=-2,35237777777778
Lat(27)=47,2582861111111

Type(28)="black"
Long(28)=-2,29888333333333
Lat(28)=47,23395

Type(29)="black"
Long(29)=-2,29860555555556
Lat(29)=47,2341388888889

Type(30)="south"
Long(30)=-2,32524166666667
Lat(30)=47,233875

Type(31)="ry"
Long(31)=-2,32583611111111
Lat(31)=47,2291888888889

Type(32)="north"
Long(32)=-2,32583611111111
Lat(32)=47,2291888888889

Type(33)="south"
Long(33)=-2,31583333333333
Lat(33)=47,222325

Type(34)="black"
Long(34)=-2,31890555555556
Lat(34)=47,2138666666667

Type(35)="south"
Long(35)=-2,30640833333333
Lat(35)=47,1934527777778

Type(36)="south"
Long(36)=-2,27830277777778
Lat(36)=47,2288222222222

Type(37)="Red_Cone"
Long(37)=-2,28361111111111
Lat(37)=47,2269694444444

Type(38)="stbd_post"
Long(38)=-2,30815277777778
Lat(38)=47,1656916666667

Type(39)="port_post"
Long(39)=-2,30815277777778
Lat(39)=47,1656916666667

Type(40)="stbd_post"
Long(40)=-2,29258888888889
Lat(40)=47,1882944444444

Type(41)="port_post"
Long(41)=-2,30479444444444
Lat(41)=47,17845

Type(42)="stbd_post"
Long(42)=-2,27686666666667
Lat(42)=47,2109194444444

Type(43)="port_post"
Long(43)=-2,28914444444444
Lat(43)=47,2010166666667

Type(44)="stbd_post"
Long(44)=-2,269325
Lat(44)=47,2223472222222

Type(45)="port_post"
Long(45)=-2,28125277777778
Lat(45)=47,2123333333333

Type(46)="stbd_post"
Long(46)=-2,25718611111111
Lat(46)=47,2318972222222

Type(47)="port_post"
Long(47)=-2,27015
Lat(47)=47,2276055555556

Type(48)="stbd_post"
Long(48)=-2,23744722222222
Lat(48)=47,2416138888889

Type(49)="port_post"
Long(49)=-2,26005277777778
Lat(49)=47,2345722222222

Type(50)="stbd_post"
Long(50)=-2,22123333333333
Lat(50)=47,2495083333333

Type(51)="port_post"
Long(51)=-2,24660833333333
Lat(51)=47,2411583333333

Type(52)="stbd_post"
Long(52)=-2,20778888888889
Lat(52)=47,2562222222222

Type(53)="port_post"
Long(53)=-2,23538333333333
Lat(53)=47,2467888888889

Type(54)="stbd_post"
Long(54)=-2,18812777777778
Lat(54)=47,2661805555556

Type(55)="port_post"
Long(55)=-2,21635277777778
Lat(55)=47,2560444444444

Type(56)="stbd_post"
Long(56)=-2,17811944444444
Lat(56)=47,2748916666667

Type(57)="port_post"
Long(57)=-2,19073055555556
Lat(57)=47,2690083333333

Type(58)="black"
Long(58)=-2,26303611111111
Lat(58)=47,2423

Type(59)="west"
Long(59)=-2,26604444444444
Lat(59)=47,2082805555556

Type(60)="mooring"
Long(60)=-2,25734444444444
Lat(60)=47,2429916666667

Type(61)="special_post"
Long(61)=-2,250125
Lat(61)=47,2424888888889

Type(62)="special_post"
Long(62)=-2,2387
Lat(62)=47,2480666666667

Type(63)="special_post"
Long(63)=-2,22744166666667
Lat(63)=47,2527361111111

Type(64)="south"
Long(64)=-2,22511388888889
Lat(64)=47,253375

Type(65)="stbd_post"
Long(65)=-2,21690555555556
Lat(65)=47,2500527777778

When i lauch BC5.8 ou senerios editor i dont see all buoys ?

Do somme one know's  what's append ?

Vivian

December 31, 2023, 02:44:42 PM
Reply #1
  • Administrator
  • Member
  • *****
  • Posts: 155
    • View Profile
Hello, can you check if the buoys load properly if you replace the , as a decimal point with .
For example, replace Long(1)=-2,37586666666667 with Long(1)=-2.37586666666667

I will check how Bridge Command handles different local number formats, it may be defaulting to the UK format (. as decimal separator)




January 01, 2024, 12:11:19 PM
Reply #2
  • Member
  • **
  • Posts: 2
    • View Profile
Thank you, it's work  :D
I replace all "," by "." decimal