Please login or register.

Login with username, password and session length

News:

Registration is only required if you want to post, and is not needed to read any posts. To avoid excess 'spam' accounts, all accounts where no posts have been made will be deleted after two weeks. Please register again if you wish to post.

Author Topic: New World  (Read 2020 times)

March 31, 2021, 04:20:34 PM
  • Member
  • **
  • Posts: 8
    • View Profile
Hi,

I simply cannot find anywhere to download maps with heights on to be used in BC.

Any clue where / how to download new Worlds ?

Of cause I had read the manual  ;D

Best regards Henrik Aaen Andresen

April 01, 2021, 10:30:46 PM
Reply #1
  • Administrator
  • Member
  • *****
  • Posts: 116
    • View Profile
Hi, can I check if you are looking for world models that have already been created, or source data to build your own area?

April 02, 2021, 07:32:38 PM
Reply #2
  • Member
  • **
  • Posts: 8
    • View Profile
Hi,

I'm building my own World - and I actually got something to work here in Denmark. :D

But if any other Worlds available I'm also interested.

/Henrik

August 09, 2021, 05:10:46 PM
Reply #3
  • Member
  • **
  • Posts: 8
    • View Profile
What about bridges ?

If I got a bridge today, it shows up as a peace of land between the to islands ?

Any clue on this ?

/Henrik

August 14, 2021, 10:20:24 PM
Reply #4
  • Administrator
  • Member
  • *****
  • Posts: 116
    • View Profile
As you've seen, the heightmap does not allow for 'bridge' features.

But if you have a 3d model of the bridge (or can make one), you can add this in your user directory in Models\LandObject\ObjectName (user directory is normally %appdata%\Bridge Command\5.6\, so this would be %appdata%\Bridge Command\5.6\Models\LandObject\ObjectName). Then you can load this into your world model in the same way as any other 'land object'.

August 20, 2021, 03:54:24 PM
Reply #5
  • Member
  • **
  • Posts: 8
    • View Profile
Hi,

Thanks for the solution, I will try.

/Henrik