Support > Bridge Command General Support
Ship console config 5.4
(1/1)
markmcfdyn:
I am using the VRinsight ship console, but I can't obtain functionality with Bridge Command.
After much trial & error, and editing the %appdata%/Bridge Command/5.0/bc5.ini, I can access the rudder control but not the throttles (still only activated by the keyboard). The Win 10 64 bit OS can see & calibrate the console, but not Bridge Command.
Any assistance would be much appreciated.
Cheers.
funscanadian:
Hi, Mr. Packer has a nice little tool for Joystick inputs to edit the INI file for VR Insight console. I have it on a Facebook page in the download section. If you email him he can probably send it to you or you can download it from Ship Simulation in a Sea Cadet Environment Facebook Page.
Cheers
Frank1988:
I had the same problem. rudder control is ok, but throttles have no response in bridge command.
The JoystickState.exe is useful to detect the channel number for rudder control(6), left throttle ( 8 ) and right throttle(7). In addition, the INI file has been configured according the channel number.
Do you solve this problem?
Thank you!
Note: Edited by forum_admin as the ( 8 ) was converted into (8).
forum_admin:
Just as an update, the problems with the Ship Console should be fixed since version 5.4.3.
Based on reports from users, one of the following settings should work:
port_throttle_channel=8
stbd_throttle_channel=7
rudder_channel=6
or
port_throttle_channel=3
stbd_throttle_channel=2
rudder_channel=1
Ship console users - please let me know what works for you!
EVIDIM:
Hi!I try to play the version 4.6 but throttles (shipdrive) are doing exactly reverse motions.
Fir example when i make port throttle astern by my console,then the ship is going ahead port and vice versa.
Please help me to solve it
Navigation
[0] Message Index
Go to full version