Please login or register.

Login with username, password and session length

News:

Registration is only required if you want to post, and is not needed to read any posts. To avoid excess 'spam' accounts, all accounts where no posts have been made will be deleted after two weeks. Please register again if you wish to post.

Author Topic: joystick configuration from BC 4.7.  (Read 12831 times)

August 02, 2015, 08:23:37 PM
  • Member
  • **
  • Posts: 10
    • View Profile
Need help to configure the joystick. I read in the documentation that must be configured channels, but I can not find that number corresponds to joystick  I tried with numbers from 1 to 15. My joystick mode isl Matz Catz Fly 5

http://store.madcatz.com/categories/specialty-controllers-category/Mad-Catz-FLY-5-Stick-for-PC.html

Thanks

August 05, 2015, 09:25:18 PM
Reply #1
  • Administrator
  • Member
  • *****
  • Posts: 110
    • View Profile
Hi, please try using the utility at  https://www.bridgecommand.co.uk/file/JoystickState.exe

If you run this, it should show the joystick channels changing as you move the inputs. Let me know if this helps.