Show Posts
1
Bridge Command General Support / Re: Charts
« on: January 18, 2024, 12:06:54 PM »
I think you have to check if you get the GPS information. Otherwise it is going to 0,0 that is not the location of your map.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Environment models / Re: A few general questions
« on: November 30, 2022, 09:09:12 AM »
Hi Robby,
I'm from the Netherlands
1 - ?
2 - As big as you wish, to big you reduce speed. You have to ask yourself how much time will take a scenario.
3 - ?
4 - Yes, but takes some effort
5 - https://www.bridgecommand.co.uk/Documentation
6 - Of course we can
Best regards,
Guido
I'm from the Netherlands
1 - ?
2 - As big as you wish, to big you reduce speed. You have to ask yourself how much time will take a scenario.
3 - ?
4 - Yes, but takes some effort
5 - https://www.bridgecommand.co.uk/Documentation
6 - Of course we can
Best regards,
Guido
3
Models / Re: .3DS or .X format confused
« on: October 11, 2022, 11:09:19 AM »
Sketchup is my big friend to build models.
4
Models / Re: Under Bridge
« on: August 29, 2022, 06:54:42 AM »
I did send Henrik some stuff to try, another thing could be the height file I think. Most of the Dutch data I have, the height data around bridges is not reliable.
5
Models / Re: Under Bridge
« on: August 26, 2022, 10:24:19 AM »
If you send me a PM, the I'll send you a working bridge, with collision enabled.
6
Scenarios / Re: New World
« on: April 18, 2022, 04:18:37 PM »
@Henrik,
Sorry I did not reply earlier. I got the data thru https://www.opentopodata.org/
@emanuelelespa
You can also your data there. I you need help, let mee know (I think James did already send you my information)
Sorry I did not reply earlier. I got the data thru https://www.opentopodata.org/
@emanuelelespa
You can also your data there. I you need help, let mee know (I think James did already send you my information)
7
Bridge Command General Support / Re: VRInsight Console and Bridge Command 5.x on Windows
« on: January 18, 2022, 09:00:12 AM »
I'm going to give it a try ;-)
8
Bridge Command General Support / Re: VRInsight Console and Bridge Command 5.x on Windows
« on: January 16, 2022, 09:11:16 AM »
As you described with https://gamepad-tester.com you could see what happens when you press a button. This was what happens when you press the "red" buttons.
I would like to map the next settings to it:
joystick_button_look_left = "AXIS 9, 0.71429"
joystick_button_look_right = "AXIS 9, -0.42857"
joystick_button_look_up = "AXIS 9, -1.00000"
joystick_button_look_down = "AXIS 9, 0.14286"
I'm not familiar with programming in c++. I'm more familiar with c#. This is a good reason to learn ;-)
I would like to map the next settings to it:
joystick_button_look_left = "AXIS 9, 0.71429"
joystick_button_look_right = "AXIS 9, -0.42857"
joystick_button_look_up = "AXIS 9, -1.00000"
joystick_button_look_down = "AXIS 9, 0.14286"
I'm not familiar with programming in c++. I'm more familiar with c#. This is a good reason to learn ;-)
9
Bridge Command General Support / Re: VRInsight Console and Bridge Command 5.x on Windows
« on: January 09, 2022, 01:45:23 PM »
Great tool!
The red buttons use "AXIS 9"
Default value: 3.28571
Left: 0.71429
Right: -0.42857
Up: -1.00000
Down: 0.14286
How to configure in the ini-files?
The red buttons use "AXIS 9"
Default value: 3.28571
Left: 0.71429
Right: -0.42857
Up: -1.00000
Down: 0.14286
How to configure in the ini-files?
10
Bridge Command General Support / Re: VRInsight Console and Bridge Command 5.x on Windows
« on: January 08, 2022, 04:39:30 PM »
In BC 5.7 VRinsight is working great! How to address the buttons I made red? There is no number available.
11
Bridge Command General Support / Re: 1-3 FPS screen refresh rate
« on: December 24, 2021, 08:11:39 AM »
I think I found the reason. In a way I'm lazy. I created a buoy file with over 18.000 items. The complete range of Dutch markers/buoys. When I made a smaller file with just 250 buoys I got about 25FPS instead of 1-3.
My problem with the radar running slow was also solved.
I'm running version 5.6.1
I send you an e-mail with my data.
My problem with the radar running slow was also solved.
I'm running version 5.6.1
I send you an e-mail with my data.
12
Bridge Command General Support / 1-3 FPS screen refresh rate
« on: December 22, 2021, 01:31:18 PM »
The refreshrate of the monitor is very slow, just 1-3 FPS
The PC configuration
- HP Z4
- Processor I9-10900X 3.7GHz
- Memory 96GB
- Harddisk 1 TB 970EVO Plus
- Video Geforce 2080T
When running BC
- Use of CPU 4%
- Use of memory 695 MB
- Use of Harddisk 0%
- Use of GPU 6%
- Use of network 0%
Is there a way to speed-up the refreshrate?
The PC configuration
- HP Z4
- Processor I9-10900X 3.7GHz
- Memory 96GB
- Harddisk 1 TB 970EVO Plus
- Video Geforce 2080T
When running BC
- Use of CPU 4%
- Use of memory 695 MB
- Use of Harddisk 0%
- Use of GPU 6%
- Use of network 0%
Is there a way to speed-up the refreshrate?
13
Environment models / Re: Data Netherlands
« on: December 18, 2021, 12:14:28 PM »
First preview. Environment build with Sketchup
14
Environment models / Re: Data Netherlands
« on: December 15, 2021, 09:25:23 AM »
I'm searching how to get here some images of the world I created with BC
15
Feature requests & suggestions / Suggestion- SQL Database
« on: November 29, 2021, 04:29:16 PM »
At this point I'm filling a lot of ini-files. It would be great to have a MySQL or MS-SQL Express database. At this point I use it in a way. I create scripts to build ini-files from the tables.
Pages: [1] 2