Bridge Command Forum

Support => Bridge Command General Support => Topic started by: jjbbcc on August 17, 2015, 04:58:19 AM

Title: Multi-screen
Post by: jjbbcc on August 17, 2015, 04:58:19 AM

sir,
I was trying to simulate the bridge command in multi-screen mode. But It is not working. All PC get connected but view is not coming properly. Say in main computer it is OK, but other computer when I change view by pressing space bar i get only two view of two different ship side ( Left and right). I get all same scenario like lights, other object even own ship's head in all display. How can fix that?
best wishes for you.

Title: Re: Multi-screen
Post by: jjbbcc on August 18, 2015, 05:43:43 AM

As well as I have tried with "M" before IP address and I was Running it with Map controller.

Title: Re: Multi-screen
Post by: jjbbcc on August 19, 2015, 04:20:28 AM

Please i need help.

Title: Re: Multi-screen
Post by: forum_admin on August 23, 2015, 07:31:10 PM

(Contact made by email) - For general information:

Just to check first, are your secondary displays communicating correctly with your main PC? You should see a display without any controls, but where the 3d view duplicates the main screen, with a your ship and the other vessels moving identically.

If this is working, this is a good first step. Let me know if this isn't working.

To get your secondary screens displaying a 360 view, you will need to set the view_angle in all the bc4.ini files to 60. To set the viewing angle, you can do this manually with the arrow keys, or set the look_angle to 0, 60, 120 etc for each computer.

Let me know your progress, and I'll try to help as much as I can.

Title: Re: Multi-screen
Post by: jjbbcc on August 31, 2015, 04:17:07 AM

Thank you sir, Everything works fine.