Bridge Command Forum

Support => Bridge Command General Support => Topic started by: ignacio70 on August 02, 2015, 08:23:37 PM

Title: joystick configuration from BC 4.7.
Post by: ignacio70 on August 02, 2015, 08:23:37 PM

Need help to configure the joystick. I read in the documentation that must be configured channels, but I can not find that number corresponds to joystick  I tried with numbers from 1 to 15. My joystick mode isl Matz Catz Fly 5

http://store.madcatz.com/categories/specialty-controllers-category/Mad-Catz-FLY-5-Stick-for-PC.html

Thanks

Title: Re: joystick configuration from BC 4.7.
Post by: forum_admin on August 05, 2015, 09:25:18 PM

Hi, please try using the utility at  https://www.bridgecommand.co.uk/file/JoystickState.exe

If you run this, it should show the joystick channels changing as you move the inputs. Let me know if this helps.