Bridge Command Forum

Support => Environment models => Topic started by: jjbbcc on July 02, 2015, 08:16:13 AM

Title: Adding light foe bouy
Post by: jjbbcc on July 02, 2015, 08:16:13 AM

Good Day. Would you mind explaining how to add light to buoy.
thank you for your patience

Title: Re: Adding light foe bouy
Post by: forum_admin on July 06, 2015, 08:17:45 AM

Hi,

To do this,
1) Find the number of the buoy you want to add the light to (from the buoy.ini file)
2) In the light.ini file, add the light by:

Increasing the 'Number=' value by one, and then adding a section in the following format:

Buoy(#)=<Buoy Number>
Height(#)=4.0
Red(#)=255
Green(#)=0
Blue(#)=0
Range(#)=4.0
Sequence(#)="LLDDDDDD"
StartAngle(#)=0
EndAngle(#)=360

Replace the '#' with the number of the light, and <Buoy Number> with the number of the buoy you want to add the light to. This example would add a flashing red light, on for 0.5s, then off for 1.5s, and at 4m above water level.

For more details, have a look at https://www.bridgecommand.co.uk/Doc/WorldFileSpec.php

Title: Re: Adding light foe bouy
Post by: jjbbcc on July 07, 2015, 06:07:58 AM

Thank you sir. This information was helpful to me.Be blessed