Hi, the first congratulations for this simulator, it´s a good tool for training to desk cadet.
I try to make a real world model but I have one big problem, when I put the ship on image in a new scenario and run the program I see on plotter the ship around 150m northwest 330º +-. When I put a lighthouse in the landobject file I see the exact position on plotter.
I think that the image have a bad calibration, is UTM projection.
height.png is 1025
texture.bmp is 1024
I paste my terrain.ini
Number=1
MapImage="texture.bmp"
HeightMap(1)="height.png"
Texture(1)="texture.bmp"
TerrainLong(1)=-1.04958832263947
TerrainLat(1)=37.521427154541
TerrainLongExtent(1)=0.1161826408
TerrainLatExtent(1)=0.09209053245
TerrainMaxHeight(1)=480
SeaMaxDepth(1)=50
TerrainHeightMapSize(1)=1025
Which would be the problem?
Thank you very much
Hi, apologies for the long delay in getting back to you. I've run your terrain.ini with my own height maps, and it all seems OK. Are you able to send a copy of your whole world model, or have you been able to resolve the problem?
https://youtu.be/NkrP42DezuI